Lexmark Wheelwriter 3500 Typewriter "tech" Questions

...need to use after I remove the old lubricant? When the keys get badly gummed up you probably need a tech, however if you know how to remove the case and are brave spray the pivot points on the ...

...roller and sprayed with WD40 still no movement. Any suggestions? Also, do you know of any service techs in the Boston area for this machine? Thanks for any help you can give. You seem to have some ...

...I type. If the printwheel dosen't stop at the sameplace on power upit needs a homing pawl and a tech. ...

...You are either in the PS setting or the P/W homing pawl is broken. If it's the pawl you will need a tech. ...

...-- work. The keyboard is totally unresponsive. You probably have a broken belt, you'll need a tech. ...

...space lights (1, 1.5, and 2) Performed listed WD-40, cleaning. where to now? You probably need a tech. Sounds like it power supply or bad board. ...

...won't print at times. Power fails. cord and adadpter fine. ave your unit be checked by a qualified tech. There might be a problem with the power ...

ibm selectric will not backspace Probably needs a tab tensioner on the R. side. You probably need a tech. DickyO

...to be stuck. They make noise but don't move. The tab tensioner is probably broken you need a tech. ...

...long as other companies. Call their parts department. I purchased third party parts from AMES and Tech Support. Both companies were located in Atlanta Georgia. Those two companies also sold the ...