...prime. Try to trouble shoot the problem by doing this: clogged filter(s) you did not clean paint out of machine properly on last use the packings are worn and need to be replaced- it wont hold or ...
will not prime Filled water into drum. Power on, switch to prime, noise of motor but nothing happening. Most of the time when a unit will not prime it is because of a stuck inlet ball, I would put the
my procoat won't prime The inlet valve is probably stuck. It is a flat poppet type, so you need to free it up. A Graco dealer should be able to supply a special small plastic bottle with a special top
Shoots drips Hi I have a PP117. Worked fine yesterday when I used it for the first time, priming a wooden wall with water based prime. Today when I sprayed the first layer of coat, water based paint. ...
...prime Tap where where the intake ball to free it up or take it apart and clean out the ball To avoid the balls of the valves from sticking to their seats, after you have cleaned out the sprayer ...
unit won't prime, YOU HAVE A STUCK INLET BALL Have the unit in water, pressure relief valve turn the machine on and tap with a hammer at the inlet ball, This frees it up 90 of the time. Otherwise the ...
Won't prime You either have a stuck ball valve, or a leak in the paint suction
Question about GRACO INC Tools & Hardware - Others
...prime after cleaning with paint thiner Could be that your were using water based paint, so if there was any in the sprayer when you cleaned it out with thinner, this could cause the latex to become a ...
5 questions posted
Usually answered in minutes!