there is no light on the cord and green lights flash all around the X on the controller, battery is new. What would cause this. the controller port could be broken or the usb input is dinted or broken
Question about Microsoft Xbox Video Game Consoles & Games
broken usb port smashed prongs wont even come on i pullled out the play anfd charge kit on my xbox 360 and when i did it pulled the black piece out and also bent th prongs how do i fix it. help PLEASE
...USB port is likely broken for good. However, you can buy USB hubs like this one that take one USB port and splits it into four. They're also really cheap, that one being around $3. Also, if ...
...broken USB port making a bad connection? If not you have bad MOSFET chips on the motherboard. There's around 5 of them the ones that usually go out are right in front of the CPU radiator. This ...
Question about Microsoft Xbox Video Game Consoles & Games
usb to ground. Even though I found that this was my problem with my xbox unfortunately for me my board was also fried. From now on Im going to collect xbox's that are broken and use them to fix my new
Question about Microsoft Xbox Video Game Consoles & Games
...usb internet and i plug the ethernet cable to both the 360 and laptop but wont work can someone help and put it as simple as possible Hmm maybe your PC doesnt have internet or maybe the Cable is ...
...broken usb port, there should be like golden prongs in there. if they are bent, straighten them and you can turn your xbox back on. Now this might not be the case with you, but that is how i just ...
Question about Microsoft Xbox Video Game Consoles & Games
...usb ports to see if you didn't break the inside of the connectors ,if so one or more of the 4 wires (cotacts) may be touching .If you separate those contacts your console will come back to life ...
...USB door on the front of the console. Push the faceplate away from the console with your thumb until the faceplate comes off. Note You will need to use some force to remove the faceplate. Once the ...
...and one of the USB was broken and the prongs were tou=ching causing a surge to go through it., just move the prongs so they are not touching put a piece of tape over the usb so you wont use it ...
23,447 questions posted
Usually answered in minutes!
1,345 Questions
747 Questions
281 Questions
262 Questions
173 Questions