...eject hole under the disk tray. Do not force anything. just push in the clip and pull the disk tray gently. Good luck. Make sure to remove your disk before sending it in for repairs because they will ...
...eject motor or to much grime and build up in the Gears preventing the motor from breaking the magnetic seal between the hub and spindle. I normally just gap the hold down magnet in the drive so the ...
Question about Microsoft Xbox Video Game Consoles & Games
...cleaned out .plus I like to gap the hold down magnetic so the eject motor can release the tray with less force. If you have any Questions feel free to ask Rob no its not the reason , it must be ...
...force to remove the faceplate. Manually eject the disc tray Uncoil a paper clip. If your console has holes below the right side of the disc drive, insert the straight end of the paper clip into the ...
...eject motor and or grime build up in the gear train causing friction witch prevent the motor from breaking open the magnetic seal to the spindle. My simple remedy is to gap the hold down magnetic in ...
Question about Microsoft Xbox Video Game Consoles & Games
disc tray won't go back in either. Unfortunately, if your console is under warranty, retrieving the disk will destroy it. The only way to actually eject the disk will require disassembly of the entire
Question about Microsoft Xbox Video Game Consoles & Games
...Eject the tray and then as it's closing give it a firm push just as it closes to force it to engage the close switch. If that's not the problem then it's more then likley you have a weak laser. They ...
Question about Microsoft Xbox Video Game Consoles & Games
...force . Or press eject wait one second and smack the top of the drive firmly this will also get to open the tray. the frictions point are hard to get to but after you sand them down the drive tray ...
...force on the round bluish optical lens. If any one has tried hacking the drive, the drive could be half bricked making the eject feature work but rendering the drive unable to read anything. You can ...
...the player Push and hold the eject button for at least 10 seconds to force an eject of the disc. After the disc ejects, turn the system off and then back on to resume play. Hope this helps. Good
23,447 questions posted
Usually answered in minutes!
1,345 Questions
747 Questions
281 Questions
262 Questions
173 Questions