KLH KL2400 2 Channels Tuner low output

Turntables have extremely low outputs and require a phono input on the receiver. If yours does more...

  KLH KL2400 2 Channels Tuner - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

passive or active crossover?? Passive crossover: you can connect the two output together to your subwoofer to have in the same time the low bass and the mid range of frequency. Active crossover: NO solution more...

  KLH KL2400 2 Channels Tuner - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

WAS REPAIRED BY RETIRED AUTHORIZED FENDER TECH. PROBLEM AMP HAS VETY LOW OUTPUT UNTIL YOU CRANK IT TO 8-10 THEN IT SOUNDS HORRIBLE DISTORTED more...

  KLH KL2400 2 Channels Tuner - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

the tubes were rattling and, from what I've been reading, had low power output. Others report using master on the clean channel set at 3 more...

  KLH KL2400 2 Channels Tuner - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

and its been great for a few years but now its output is very low, except on one distortion setting dunno if its anything in your expertise more...

  KLH KL2400 2 Channels Tuner - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

behringer and want to add some bass cabinets to boost the low end of the P.A. output.What do you suggest? more...

  KLH KL2400 2 Channels Tuner - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

The 147 receiver doesnt have an input for a turntable. THe output from a turntable is VERY low and is heavily equalized because of the actual record format ( more...

  KLH KL2400 2 Channels Tuner - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent