Question about Maytag Kitchen Ranges
...an orifice from one or more of the lines these are very common in use for gas ranges (esp older ones) ck your old lines to see them Very yellow indicates not enough air and incomplete
...old and this is the first problem i ever had with it...oh, when the stove goes out, i can still use the burners, they are unaffected Your thermal couple may need to be replaced, but I suspect it is ...
Question about Whirlpool Kitchen Ranges
remove the top on my whirlpool gold gas range. It's model gs395legq3. It's about 9 years old. I got the clips in the front un-done but cannot figure out whats going on in the back. Has to be some type
...remove the screws on each sealed burner before raising the top. Look closely and you will see the screws. They will be hard as heck to come out. If a stove is real old and I cannot get the screws out ...
...remove the old one and replace it with the new unit. It looks like I need to remove the top of the stove, but rather than undo the wrong screws (nuts) by trial and error I would like to get some ...
...gas stove top igniters won t stop clicking GE Monogram 48'' stove I got this problem yesterday. My 6-month old GE range/stove top was being cleaned by a cleaning lady and suddenly, the igniters ...
...remove them. Next find the two wires that come from the igniter. Unplug them. Lift out the burner. Unscrew the two screws that hold the igniter on to the burner. Carefully put the new ignitor on the ...
Question about Maytag Kitchen Ranges
remove these leads and buff the leads and the terminal points with fine steel wool. Burned and/or dirty terminals can cause the timer to malfunction, but a good cleaning can solve this problem. Step 4
...Remove two screws holding the old assembly then install the new assembly with the two screws. Plug in the stove to verify the problem is solved (unplug the stove if you need to for ...
...remove the old Magic Chef, since it's not working, to allow you to make a more informed decision as to fit and clearances required for the new oven. Just be sure to disconnect the power to the range ...
22 questions posted
Usually answered in minutes!
93 Questions
24 Questions
2 Questions
2 Questions