2010 Mercury Mariner "car seat wont heat" Questions

CAR NOW MY HEATED SEATS WONT WORK IS IT SOMETHING THEY COULD HAVE DONE Could be. But before you bring it back accusing, follow the wiring under the seat and check the fuse(s) to make sure that isnt it

...seat wont work on my car. the switch used to light up once in a while and now does not. i replaced the switch and the seat wont heat and the new switch wont light up either have you checked your ...

seat wont heat up passenger side works fine The problem lies in the drivers side seat, the heating element for the back of the seat or the seat heating element has an open or shorted circuit. the part

2010 FORD TAURUS LTD. HEATED DRIVER AND PASSENGER SEATS WONT STAY ON HOW CAN I FIX THIS Please don't type in all CAPS, it is considered SHOUTING and is very hard to read. It is a simple circuit, a ...

...heating pads are shorted (broken). Then check the voltage at the connector going to the seat with the car and seat heat switch on. This should tell you where the problem is, please post results

seat. i put new cars to gether an if it doesnt hav the acessories it wont have the harness u need,,maybe sumtymes they do but if ucan run aseperate switch itll work use the right amp rated wire or ull

...wont work and i replaced the switch. What else could it be.. Its both the seats. The heated seat relay has gone bad for sure on yours if the elements are good. Its highly unlikely both would burn out ...

Driver side heated seat button wont work wont turn on check button swap with other seat to try check fuses,and wiring connections to seat under it

...heat at 80 and it was still blowing cold? T he button for the seats are turn on but the seats wont get hot. I tried all 3 fuses boxes and none are bad. could you please help me? the temp regulator is ...

car. You also have to unplug the wiring harness underneath the seat. I found a black spot burned in the foam. This is where a wire had broken. I carefully pulled the wire together, then soldered it. I