2010 Mercury Grand Marquis "10 fuel problems" Questions

...a problem that was ultimately traced to a short that blew a component on the computer board. I ended up paying for the fuel pump, but just paid the material cost for the computer board. Bert ...

...fuel injection regulator; 10) the list goes on... THINGS TO TRY: Remove the air cleaner filter element and see if it's dirty. If it is, leave the element out and drive the car as hard as possible ...

...10 seconds, then runs out of gas and stalls. Will not start again unless sits for 15 miutes or so. It is apparently a fuel problem. Had a few gallons of gas in tank with Stabil when stored, I just ...

...10 times. Changed the fuel pump and checked the fuses. The fuel cut off switch and connection appears in good condition. I ran the code and it gave 1233, which was no help to me. Ford released a SSM ...

...10 min. drive but wont start until a while. When it shuts off while driving it will take approx. 15-25 min. to start again. Please Help... Someone will need to figure out if you are loosing spark to ...

...fuel pump, Yes you have to drop the tank. It's not only the pump that comes out of the tank it's the whole assembly including the float which tells you how much gas is in the tank. you have to have ...

10 gallons of fuel to the tank and check for leaks. Reconnect the negative battery cable. Turn the ignition switch to the RUN position several times to pressurize the fuel system. Check for fuel leaks

10 gasket and 1Hour of your time to fix it. You have not mentioned any codes or testing results. Your onboard computer can be checked for free at Autozone or Oreillys. Your "check engine" light should

...idea how long it has been in the car ? Have to be there 10 years to be a problem Check fuel pressure at shrader valve on fuel rail Don't assume anything-- do some testing Probably a failing fuel ...

...fuel but the problem still continued Ask yourself--How would 10 oz of anything, diluted in 18 gallons of gas,do anything!!!! When you have vehicle issues,you diagnose to find the problem,come up with ...