2011 Honda Odyssey "trunk lid pull down switch" Questions

trunk lid mechanical bind when closing from control switch - works OK if pulled down slightly then hit control switch on trunk lid. The bind causes the lid to start down then re-open I see the ...

...trunk lid pull-down assembly switch, part number 16629927, most likely needs to be replaced. The switch is mounted on top of the trunk lid pull-down assembly motor at the bottom of the trunk. The ...

...trunk lid? The switch which release's the lid (opens) and is mounted on the trunk lid seems to be working properly. Is this the switch or motor? How do I test the switch? T There's a motor that pulls ...

...trunk lid pull down fuse location any advise on a trunk lid that does not pull down Try number 13. center of fuse block labeled deck lid. To fix the problem you will need a pull down switch. The ...

...trunk lid pull-down switch located? The trunk lid on my son's 1990 Eldo no longer pulls down. I checked out the switch that is on the motor and it works properly. There is a remote switch located ...

Trunk lid pull down mechanism does not engage Car is equiped with remote and dash board release switches which both work. When trying to close the trunk lid in normal manner, push down until pull down

...switches on both the body part of the latch and the trunk-lid part of the latch) or broken wires inside the wiring harness that connects the body with the trunk lid.  Proper diagnosis

...trunk lid is pushed closed by hand, then this switch sends power to the trunk lid pull down motor which then finishes closing the trunk lid. Often the switch or motor will go bad and the whole thing ...

...trunk lid pull down motor, the pull down switch is out of adjustment or bad. It is located on the main car body, not the lid. The trunk lid pull down assembly is divided into three parts and is very ...

...trunk lid) that contacts the pull-down mechanism for power. If there is no power, the wiring is "open" between the body and the trunk lid. Look for the problem in the wiring and repair the wires. If ...