Question about Pontiac Cars & Trucks
...wont turn on when applying brakes. Its a 2004 Pontiac Aztek, just replaced hazard switch. Tried swaping sockets and bulbs, but it does flash when hazards or the turn signal is on. try replacing the ...
...sure, but I've heard a bad hazard switch can cause strange problems.Also, if your truck has a body control module that controls interior and lights, that may be your problem, too. Good
...Help! The ECU is the Engine Control Unit, it wont make the turn signals not work. Who asked you to replace it? what do you mean by "dont work", do the hazard flashers work? do all other lights
...wont same problem with hazard ,my wife uses the hazards all day they run for more than 6 hours sometimes for work , and now they may blink they may not same with the blinkers, thanks Replace the ...
Question about Honda Odyssey
...lights when brake is applied????? As cadman mention to check the fuse, and if there ok check your brake light switch along the brake peddle arm. Before you doany of that, turn your hazard light on to ...
...hazard lights are always on. Purchased steering assembly with ignition (no key) and hazard light button from salvage yard. Wire from Hazard button goes around column and ignition and to a harness at ...
Question about Honda Odyssey
hazard and signal lights not working all fuses look ok they worked and then stopped working turn signals worked then stopped then started working again but now wont work again 2004 Jeep Grand Cherokee
...hazard lights ( 10amp) - if the key comes out, then the switch is defective. Fix the problem by installing a new change lever assembly - part number for 2000 and 2001 MPV's is LC62-46-10XE with MSRP ...
57 questions posted
Usually answered in minutes!
578 Questions
521 Questions
449 Questions
472 Questions
460 Questions