2010 Ford F-150 "locating blower motor resistor" Questions

...blower motor only works on high This problem is caused by a defective blower motor speed control resistor. BLOWER MOTOR LOCATION The blower motor resistor is located under the glove box. You can ...

...blower motor usually Michael, Blower motor resistor is behind glove box, open glove box, push in on tabs(sides of glove box) and there is the resistor. links below are vids. showing how to. "I hope ...

...blower motor resisters are burned out for speeds 1,2 & 3. High speed does not have a resister. Replace the resister. If it goes a 2nd time, it is because your blower motor is failing & drawing too ...

...blower motor resistor located on a 2000 F150 XLT, 4.6 V8 Just a picture to confirm what coly_coli posted, no new information This is the wiring harness for the blower motor resistor, the actual ...

...blower motor resistor is in the blower itself. Here are some pictures to help you locate it. These are taken looking under the glove box The blower motor resistor is to the left of the pigtail shown ...

blower motor resistor. For the new body style 2004 ( not the 2004 Heritage or Lightning models ), it is behind the glove box. Open teh glove box, press on one side, to allow the glove box to hang down

blower motor only works on high fan I suggtes check the blower motor resistor, it's located inside the on the passenger side under the glove compartment. The blower motor is the same type for all F150

blower motor resistor is responsible for blower speeds less than high or full. The resistor is located on the passenger side underdash next to the blower motor, should be 2 screws and a wiring harness

...blower motor resistor. Usually when the blower goes single speed, the blower motor resistor is the cause. You can find it on the passenger side, looking up behind the dash / Glove box area. In this ...

blower motor only runs on #4 setting on dial. will not run on the slower settings. How do I fix this problem? this is an F150 4X4 2004 model. Fuses are good. It just started doing this all of the time