...switch located near the top of the passenger side kick panel. if you changed the key, you will be having an antitheft problem. you could try putting an original key at the lock cylinder while turning ...
...the key broke so i changed ignition switch and now it wont start,but all the lights work,but theres' nothing happening in the start position who changed ignition switch? most likely not wired ...
...change the key switch and now the explorer doesn't want to start Yes it does have a microchip did they replace it with the right key switch and try unplugging the negative battery cable for about a ...
there is no power coming to the fuel pump and nuzzles.I lost my key, but I got another one.I changed the entire key switch. there should be a fuel shut off switch,in case of an accident.
upon starting, vehicle dies,keys don't function, changed starter, changed fuses, same problem, all dash lights work, not flashing on and off, could not find emergency on/off switch, battery is good, ...
...change in a 2006 ford explorer Might need to disconnect the battery for a few minutes to reset the computer. Turn switch on, pump gas pedal and then brake pedal three times and shut off key, then ...
...change. can shift to neutral with key in ''on'' position and then drive but still no brake lights. checked fuses all ok check for 12 volts at the switch if yes then check for 12 volts coming out the ...
Question about Ford Explorer
...switch also. i have power everywhere in truck. i can hear a click when i turn the key. but nothing. i have tried to cross the solenoid to start it, and it will just turn, but not fire. Mar 19, 2010 - ...
...key chip if i have to change it i was told that the pcm also has to be changed. That is the PassLock Sensor but you don't need to replace the PCM to replace the PassLock sensor. A simple re-learn ...
Question about Ford Explorer
...change it to drive. When the key switch is in on or start, the shifter lock solenoid is powered. When you push on the brake pedal the power is cut. The brake switch and the solenoid would need to be ...
51 questions posted
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions