2011 Ford Edge "install valve guides" Questions

Ad

...Valve. I need instructions for the install of the plugs which most likely involve removal of intake manifold and other parts. I don't want to get into the job and realize I needed parts and not havce ...

Ad

...tappet guide plate retainer tabs are toward the rear of the cylinder head , and the valve tappet guide plate tabs are toward the front of the cylinder head. To install, reverse the removal

Ad

...valve is new. I would suspect, unfortunately, that you have a bad head gasket. incorrect rebuild --can be anything from incorrect gasket install -loose or not correct torque on bolts --damage to a ...

...install new guides, guide liners or bore out the old guides to accept new valves with oversized stems. Aluminum heads have cast iron or bronze guides that can be replaced but most cast iron heads do ...

...it needs new "valve guides". What and where are they and, what do I need to do to replace them? They are what the valves travel up and down in,the heads will have to be removed to install the ...

Question about Ford Edge

3 Answers

...valve cover. Install and tighten the valve cover retainers to 71-97 inch lbs. (8-11.5 Nm). Attach the spark plug wire separators to the cylinder head. Connect the engine air cleaner-to-valve cover ...

...link to what controls your water flow at your heater core,join the site their,then you can use their repair guides,it's free, Repair Guides Heater Water Control Valve Removal Installation AutoZone ...

...Install valve cover. Pull out cord. Replace the plug. Don't nut up over the cord thing. Kart racers use that technique all the time. I don't know anything about your engine but I wanted to mention ...

Question about Ford Edge

1 Answer

...usually caused by excessive valve guide clearance. Have new inserts installed or could possibly get by with knurling the guides. Hve a mechanic pull the heads and check for excessive guide

...valve guides and they didn't .. 100k on motor. any clues of what could cause the leak down into the cylinders ??? Could be the guides, but the head gasket could also be the problem if not installed ...

Not finding what you are looking for?
2011 Ford Edge Logo

235 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2008 Ford Edge
2008 Ford Edge

200 Questions

2010 Ford Edge
2010 Ford Edge

84 Questions

2007 Ford Edge
2007 Ford Edge

50 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...