2010 Chevrolet Impala "remove battery" Questions

Ad

...Remove the battery retainer bolts (1) and retainer (2). With the aid of an assistant, remove the battery. Remove the electrical center cover (1). Disconnect the positive battery cable from junction ...

Ad

Remove the battery clamp and bolt. Probably a 12mm socket with extension. It's tight, but the battery can be removed. Reverse instructions for installing the battery. (That includes hooking up the red

Ad

Question about Chevrolet Impala

1 Answer

...battery. Remove this bolt that holds the plastic 'hold down' bracket. Use an 8mm or 5/16" hex wrench to undo the negative terminal first, then the positive terminal. Pull out the old battery. ...

...Remove the underhood fuse block(s) battery cable and buss bar terminals from the fuse block by pulling down. Remove the fuse block and lamp wiring harness from the vehicle, if required. I copied the ...

would drain the battery if car sat a weak,ending up being the radio shorting inside, dont know if thats your problem but i would start there, dont remove fuse have to remove the radio! hope this helps

...battery then remove the negative cable from the battery and place a test light between the battery and the cable if the light is on you have a draw remove fuses until the light dims then the fuse you ...

Question about Chevrolet Impala

1 Answer

...Remove the accessory drive belt. Disconnect the negative battery cable. Disconnect the generator electrical connector. Remove the engine harness terminal from the generator: - Slide the boot back ...

Question about Chevrolet Impala

4 Answers

...battery. Remove the battery and take to to your local auto parts store to have them check it. i belive your alternator is bad or if there is an additional output of power like a car alarm or even a ...

Question about Chevrolet Impala

1 Answer

...Fortunately, the 3 bolts on the stabilizer bar are easy to take out. Use a ratchet or wrench to remove the bolts, lift the stabilizer bar out, and pull the battery straight up. Hope this

Question about Chevrolet Impala

1 Answer

...remove battery and battery tray.step 3.  remove drive belt.step 4.  remove water pump bolts ( 318 ).step 5.  remove water pump ( 300 ) and water pump gasket ( 314 ).discard gasket.step ...

Not finding what you are looking for?
2010 Chevrolet Impala Logo

232 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...