...output tray before opening the top cover. Do not touch the transfer belt. 2. Slowly pull out the drum cartridge. removed drum cartridge on top of the printer keep it close and insure it is safe and ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
...check the output roller after fuser unit(if there is), check them are spin or not, this roller kit use for pull the paper goes out the tray. if not spin means the roller drive belt or gear loosen. 3) ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
...Check the input area for obstructions such as media in the path. Also check to see if the registration assembly damaged or unseated. 3. Replace any defective sensors or flags. 4. Verify the media ...
...Check inside the printer to see if the cartridge carrier latches that hold the ink cartridges down have popped open. Close the carrier latches STEP: Remove any Torn or Stuck Pieces of Paper from the ...
...Check inside the printer to see if the cartridge carrier latches that hold the ink cartridges down have popped open. Close the carrier latches STEP: Remove any Torn or Stuck Pieces of Paper from the ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
...Check the input area for obstructions such as media in the path. Also check to see if the registration assembly damaged or unseated. 3. Replace any defective sensors or flags. 4. Verify the media ...
...check fuser and pressure roller(near fuser) any pieces of paper there 4) after fuser to output tray all above step checking for avoid any pieces paper obstruct any sensor through all paper road, so ...
...check the paper feed areas of the printer to ensure that there are not any obstructions in the printer that would prevent the paper from feeding correctly. Once this has been verified, we can perform ...
...output tray. look inside the product..check for torn papers..gently pull out the paper fromthe roller...return the paper output tray and the carriage access door. plugthe power corn and turn on.. 4. ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
...Check for any obstructions under or around the carriage that prevent it from moving. Make sure that the carriage can move freely across the width of the product by firmly pushing the carriage to the ...
359 questions posted
Usually answered in minutes!
259 Questions
244 Questions
182 Questions
115 Questions
97 Questions
