printing envelopes I have a magicolor 5430 dl and I'm trying to print envelopes for the first time. I changed the dials to "envelope" in the side of printer, opened "properties" in the print window ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
when I print enveloppes with my Konica 2430DL, I get shadows, but not on other print jobs When you look at an envelope, it has spots where there are 2 to 4 thickness of paper in spots.( folds of the ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
Paper pickup not moving The printer was working fine today until I attempted to print envelopes. Initially I narrowed the feed tray to hold just the envelope but the print area was wrong. ...
...levers at the top (when you open the hood) and on either side of the fuser that have an icon of an envelope on them; they need to be down for regular paper and up for the stock like envelopes and ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
...THE PRINT IS FADE'D, YOU HAVE ANY IDEALS? There are two levers at the top of the fuser that have envelope icons on them. These levers reduce the pressure on the fuser assembly for thick stock. If ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
toner smudges on paper after printing usually on toner smudges on paper after being printed usually on right side of paper check the two levers with an envelope on each, to the left and right of the ...
...the first page prints, i have no more problem. it's getting the first one to print is the problem. Envelopes are tricky also. Clutch for paper feed system might be dirty and require cleaning, will
Question about Konica Minolta Magicolor Office Equipment & Supplies
...might print faded only on one side??? check the green levers at the top of the fuser unit that have envelope icons on them. They reduce pressure on the fuser assembly for thick stock. It is possible ...
print envelopes fuser location of the fuser the fuser is easy the section where the heat is coming from
...brightness & sharpness...but how do i get out of draft quality? Make sure the paper isn't set for "envelope
111 questions posted
Usually answered in minutes!
321 Questions
259 Questions
244 Questions
182 Questions
115 Questions