Konica Minolta magicolor 2430 DL Laser Printer "tbu" Questions

...paper stuck out there or did I possibly scratch the lens? Thanks Ned Kamar its not hard to replace TBU, remove 2 skrews and open connector and reinstall a new one. but be careful with the new on. ...

...and power on again. if works, then everything is ok, if not, then there is something wrong with TBU or TBU Also if the tab breaks off the door that you open to remove those items, it won't allow ...

...location, then you have to replace pc drum, if not, take a look at transfer belt, same options, if TBU is also clean, then see fusin unit

not helping and you wont find anything, last thing is remove back and side covers, carefully remove TBU, unhook the connectors and remove two screws in fuser sides and remove fusing unit to inspect it

...left side of the toner is broken. check the mirrors on toners.for marks on paper check pc drum , TBU and fusing rollers, if you fin same kind of mark there then you found youre faulty part. about ...

...transfer belt, it seems that the transfer belt is not cleaning very well, if you find same marks on TBU then you may try to clean the cleaning unit if no help, then replace TBP. not at all, pc drum ...

...wipe it away. but you should know that even if you remove labels there may still some marks on TBU and PC drum what leads to quality

...need to take it in to get repaired?? code 16 h is showing this code means, youre label get stuck in TBU and the TBU is not rotating anymore, take out tbu and try to find these labels and remove them ...

...which side of the transferbelt unit do you remove? if i remember right, open right door, remove 2 tbu lock scews, open left cover, remove waste box and then remove ...

Can i extend the life of the transfer unit Thank you you can reset it,use 63 or 80mA fuse, the fuse is located on the left side of tbu