Konica Minolta PagePro 1350W Laser Printer "copier scrap tray" Questions

...machine and you will see the punch scrap case in the upper area of the attatchment side of the finisher. You may just have to open the door on the finisher that is on the right side facing the

OKI 5100n Will not feed paper And say there is a paper jam Take out all consumables - toner, drums, image belt check for scraps of paper take out paper tray check for paper inside open all doors in ...

...tray." That isn't on the 960C - and I can't get to scrap of paper peeking from cartridge railing area. When I turn on printer, scary loud noises begin. I'd be happy to type out the instructions on ...

...tray areas roof of the machine and you should see a row of black rollers. See picture below. 10. Look in-between each of the black rollers for a piece of stuck scrap paper. (A flash light may need to ...

...copier printer The message Paper Jam may appear on the display if the Brother machine is not feeding paper correctly, paper scraps have become stuck in the print head path, the paper is not loaded ...

...in the tray. Most likley a paper scrap is in the paper path (the side that does not go in) use a flash light a look for that scrap and remove it. when done clean the pick up rollers with a damp

...scrap jammed.When paper tray is pulled out,open paper transport unit-You have green handle on the right side of machine,in the place of right side of paper tray.Pull out paper transport and remove ...

...Tray. We have looked EVERYWHERE for even a tiny scrap of paper and find nothing. Help!! Check on TOP of the bottom paper tray. The NO paper sensor is "hanging" to sense no paper condition. Free this ...

Where is tray one? My printer Brother laser HL-1850 says paper jamed on tray one. I took out trays the cartridge and still don't see jamed paper. Where is tray one and how do I prevent this from ...

After freeing a paper jam on my Samsung ML 1750 the On line/error After freeing a paper jam on my Samsung ML 1750 the on Line error light still shows up and I cannot print. How do I overcome this? ...