Minolta magicolor 2200 DeskLaser Printer "replace new transfer belt unit" Questions

...Replace new OPC DRUM and turn BLUE KNOB of TRANSFER BELT back to 7 o'clock position Replace Waste Toner Box, Close Front Cover and Switch On. Status Display will show OPC Drum at 100% (You can also ...

...new fuser has no effect. This is a symptom of a well-used transfer belt. Replacing it should do the trick. To verify: Check the transfer belt. The transfer belt is the large replaceable unit close to ...

new transfer belt. 8-o Good luck! You need to replace the TRANSFER ROLLER Thanks axemann1 - you were completely right - in true magicolour style yet another consumable is saved by simply cleaning with

...new printer (http://www.fixyourownprinter.com/forums/laser/21006#1) Is this still the case (in 2008)? My printer is ghosting, from black only, and from the same printer page (not the previous page). ...

...transfer belt. Inspect the imaging units for foreign material where they meet the belt. Inspect the belt (you may be able to do a quick check without removing it). If the belt has smudges on it ...

...replace the drum unit. Did so and it didn't fix the problem (returned the new drum also). Pages are coming out 'grainy' or 'shady'. HELP! Love the printer otherwise.... If all the colors are effected ...

...new one. The light is still on and when I go print it says it is empty. On the status window it will not let me click on replace toner tab. I have reset many times still same issue, very frustrating ...

...new. As for the board you might have gone to far board might now need to be replaced. Dust will not hurt the chips on the board. sure corroded contacts not good. when did this start? When INTIALIZING ...

...replace the transport unit. Step 14 is misleading as there are way more than 10 screws involved in freeing the Transport Unit. There are actually just 4 each on the front and rear, 2 long brass ones ...