Minolta magicolor 7300 Laser Printer "new black cartridge printing grey" Questions

...black", therefore I can not click on toner replacement Here is what you do.... turn off the power, open the door to access the toner cartridges. You'll see the access port to pull the cartridge out. ...

...black ink only as monochrome. Can I use a new driver and chnage setting on printer to ignore ink level? can you go into the printer properties then preference's or the gear box change to grey ...

new black ink cartridge, still does the same thing. cleaning heads doesn't fix it, all other colors are fine. it won't print any black lines if doing the nozzle check... but will print very nice clear

...black cartridge but did not resolve the problem - both old and new cartridge give the same results You need to take it a couple steps further after your test print. Sounds like your print heads need ...

...black but light gray and colors come out, but again they're gray-ish. Am I using the wrong driver? My ink cartridges are new, I replaced them when I connected the printer to my ibook. Any help would ...

...new Samsung black toner cartridge as the printer was only printing a faint grey print, but the new cartridge is still not printing out clean black print - only faint grey. Does this mean that the old ...

...black cartridge has 60% of the ink left. I have run print diagnostics and print head cleaning through level 2 with no improvement. HELP! Thank you. Could just be a faulty cartridge? My hp printer ...

...new black ink cartridge and it will not print black but a light grey. Everytime you install a new cartridge, you should print a test page which will allow the printer to auto adjust to the target ...

black comes out 25% grey at a guess) although darker to the right of the page. Cyan/Magenta/Yellow all 100% perfect all over the page. Had a full aftermarket toner cartridge in when this started, have

...new black cartridge and it now prints black fine, but give me a warning that my black cartridge is now below the minimum necessary. Should I ignore the warning or will it shut down and not print. It ...