Minolta magicolor 2350 Laser Printer "roller" Questions

...time (ie a sensor is not reporting that a peice of paper has reached it) so this can be cased by 1. rollers slipping on the paper from a/ slippy media - try a different paper (even as a test) b/Build ...

Konica Minola 2300DL laser printer. When I try to print, it jams at the printer rollers just before the paper ejects. It fan folds in the top rollers There is no paper stuck anywhere? I would closely ...

SERVICE CALL 14 XFER ROLLER Have installed new transfer belt. Still had error message. Came here and read tips. Cleaned the sensor both in the printer and on the transfer belt; reinstalled. Still ...

...in the middle of printing, opened the door to back, unlashed the 2 green tabs to the final heat roller towards the top and there was my page. i gently pulled it out error gone. but in your case ...

Paper jam at transfer roller with no paper jammed. Have cleaned rollers with 409 Had the same problem after cleaning the rollers also. Technical help was rubish. In the end I found some clues n fixed ...

...printer paper jam that will not clear Have a severe wad of paper jammed at the rear on the user roller. The paper wad is on the right rear and have only been able to get small pieces out over

Scratch on hot roller If I have a scratch on the hot roller, is there anything I can do to repair it or do I need a technician to fix it? No, there is no way to repair the roller. It has a teflon / ...

how do i replace a transfer roller in konica minolta 2300dl The transfer roller is the sponge looking roller at ea. Replacing the transfer belt mite also be a good idea.ch end of the roller should be ...

what does trans roller low mean The transfer roller is near the end of life; you need to prepare a new transfer roller. The printer will tell you when by changing the message to trans. roller end. The