...Jam Fuser" on the screen. simply opening the front cover appears to clear the error message. But the next time you attempt to print, the error and blank paper "printing" returns. replace the fuser ...
...jam The paper is crimping up into an accordian at the fuser. Drop the cover down and release the 2 green cilps and allow the paper to be pulled out Switch OFF and let it cool for 10 minutes. If the ...
...jam open top scanner, open inner cover where printed paper normally comes out. push left and right locks on the fuser and the fuser will come out. remove jammed paper. put back together in revers ...
Question about Minolta Magicolor Office Equipment & Supplies
...open Close the fuser cover located behind the back cover of the printer. Paper jam Clear the paper jam. See Paper jams and how to clear them on page 85. If the printer does not start printing, press ...
Question about Office Equipment & Supplies
jam and to open the front cover, but there's no jam. I remove the paper tray, open the front cover, it resets and the same thing happens again. This printer has a straight flow through path. * Situate
...Open the jam clear cover. Pull the jammed paper out of the fuser unit. 7. Close the jam clear cover. Close the face-up output tray. If the paper jam still cannot be cleared, for HL-5130 and HL-5140 ...
Question about Minolta Magicolor Office Equipment & Supplies
...jam & back cover open fault The printer feeds paper and then stops with the paper 1/3 the way into the fuser. A fault "back cover open" appears. To clear you have to remove the drum / toner ...
Open the jam clear cover. Pull the jammed paper out of the fuser unit. Close the jam clear cover. Close the face-up output tray. If the paper jam still cannot be cleared, for HL-5130 and HL-5140 users
Question about Brother Office Equipment & Supplies
...open the fuser cover (1). 9. Using both hands, gently pull the jammed paper out of the fuser unit. 10. Close the back cover. 11. Pull the duplex tray completely out of the printer. 12. Pull the the ...
Question about Minolta Magicolor Office Equipment & Supplies
...was no jam. It will not let me print at all until I clear this nonexistant jam. pull your fuser out and you will find the jam and reason for the noise. it is pulled from the rear 2 covers and 2 ...
46 questions posted
Usually answered in minutes!
72 Questions
66 Questions
47 Questions
19 Questions
16 Questions