Error of L6-10 - Can someone please offer any advice as to what this is ? TIA Simon http://www.printcopy.info/shop_e/cdrom.php?brand=OKI Here is a link to service manuals for OKI you have a bad laser,
...error L6 mean for this printer. Also a part number for any necessary part. L6 is a Polygon Motor Lock You could try to reset the machine with a simulation code 14, which to perform it: 1. Push Clear, ...
error L6 , please guide me . L6 is a Polygon Motor Lock You could try to reset the machine with a simulation code 14, which to perform it: 1. Push Clear, Auto, Clear, Auto in a steady rythmic fashion.
Question about Sharp Office Equipment & Supplies
i do to solve then problem. Copier model number is AR-M207 Try the following code - clear / interrupt / o / interrupt. punch in 16 and press ok/enter U2 error code will be cleared.restart your machine
Question about Sharp Office Equipment & Supplies
...error code, I was advised to reset my Sharp AR-M205 copier by pressing: "#", "Interupt", "Clear", "Interupt", "14", "Start Key" However, I cannot get the display to offer me the opportunity of ...
Polygon motor problem. I would suggest repairman service for this one as it requires stripping the unit down. Try reseting the error first though. "#" "interupt" "clear" "interupt" "1" "4" "start key
ERROR L6 the indicator light L and 6 is flashing and the copier will not operate on a AR-205,i press and hold down the Start key and let it flash through the fault sequence, it show 10 An L6-10 code ...
...error code indication. After press "C" Clear (orange color button), followed by "Auto" (the most left small button) - exposure mode key; and "C" followed by "Auto" again, the copier starts to print ...
Question about Sharp Office Equipment & Supplies
...error code it means "laser drive, motor", It can be reset, the procedure as follow; 1, press "clear", "exposure mode", "clear", "exposure" those keys.then machine go dead. 2, enter 14, then press ...
Question about Sharp Office Equipment & Supplies
error l6-10 appears on screen at startup. What does this error code indicate? The polygon motor in the laser unit is reporting a locked (unable to turn) situation. Try clearing by pressing P, *, C, * ...
20 questions posted
Usually answered in minutes!
103 Questions
111 Questions
28 Questions
50 Questions
30 Questions