...left side of the paper. The print fades and then there is nothing on the right hand side. It doesn't matter what you print or from what program, only about 2" prints down the left side of the ...
...seems to be fine. Can you help? > OKI C5200n laser printer Take the toner-cartridge out, and gently tilt it left-and-right to redistribute the remaining toner in the cartridge. Reinstall
Question about OKI C Office Equipment & Supplies
...left and right sides of paper The print quality on the left and right sides of the paper is poor. and faded. However, the quality in the center of the paper is perfect. I have changed, drum kit, ...
...the color is faded on the left side of the paper. Black print is fine, only color is faded. Any solution? Your drum alignment is wrong the drum is one tooth shifted on one side ( most right side
Question about OKI C Office Equipment & Supplies
Left side of page faded out. Right side OK Minolta Magicolor 2300DL - Photos on the left side of the page are washed out, especially the greens. The right side appears to be OK. I have a new drum. Is ...
Question about Kyocera Office Equipment & Supplies
...,left side is dark but fades to the right right side copies light clean optics or check if the transfer roller is balanced on both sides check the polygonal motor if there is moisture in its ...
...on right and left sides. Print is legible, even in faded areas. Open top cover and remove toner, shake toner cartridge and try a test print. IF image good then problem is low toner level in
Question about OKI C Office Equipment & Supplies
left side margin it fades out and is kind of pixelated ... replaced head carridge and brand new cartridges so it is not that could it be that something broke inside the printer? First try to align the
Question about OKI C Office Equipment & Supplies
...left side and gradually increasing to full color on the right side. This is particularly noticeable in color printing (very bad) and somewhat noticeable in black. Printer is Samung CLP310. i want to ...
Question about Zebra Office Equipment & Supplies
...the left side is Ok and faded on the right side, then the position of the printhead pressure toggle may need to be adjusted. Make sure it is positioned over the center of your label. Hope that helps
211 questions posted
Usually answered in minutes!
152 Questions
147 Questions
126 Questions
93 Questions
81 Questions