...Error The K ID unit is not operating properly. Check to confirm that Image Drum is seated properly. Check to confirm that the K ID unit is in position. Replace the K ID unit. Replace the K ID
Question about OKI C Office Equipment & Supplies
...Check your page count, drum life on a C3200 is roughly 15000 pages. This information can be found on the information menu map. Information Menu MenuItemDefault Setting PRINT MENU MAPEXECUTEPrints the ...
Question about OKI C Office Equipment & Supplies
check the connection to the black LED head and make sure there is nothing blocking the light between this head and the top of the image drum. It may also be worth swapping the LED head between colours
...check for torn paper around the rollers of the imaging drum that might be rubbing the area. Clean Cyan led head (on lid) Replace Cyan drum with new Faded black line through lhs of image area. Affects ...
...image drum, toner and check the print out. I bet that did not work. I had this problem on all three of my Okidata LED printers... right out of the box. And after replacing drums and toner. After tons ...
...Check the little switch/door on the left hand side of the drums. This has worked successfully for me. Symptom: After replacement of a C3530 Image Drum, the message, "Toner Sensor Error" is displayed. ...
...image drum is dirty then wipe it very gently with soft tissues, being careful not to scratch it.Open the top cover and check to be sure that each toner cartridge is fully seated and that each toner ...
...say there is a paper jam Take out all consumables - toner, drums, image belt check for scraps of paper take out paper tray check for paper inside open all doors in front and reat check for paper ...
Question about OKI C Office Equipment & Supplies
...Check the cable connection, then replace the high voltage power unit or belt unit. Has operation been restored? YES END • NO Is the I/D unit terminal properly connected to the contact Assy? (Refer to ...
Question about OKI C Office Equipment & Supplies
...image has a pattern on it. If the pattern is less than one inch long, it's the rollers, whose outside circumference is small. If it's about three inches long, then you have a dirty drum or a dirty ...
211 questions posted
Usually answered in minutes!
152 Questions
147 Questions
126 Questions
93 Questions
81 Questions