OKI B6300n Printer "fuser unit" Questions

...fuser unit Power the printer off, make sure the printer is plugged directly into the wall outlet not a surge protector also remove the fuser unit and reseat. If the error 173 message continues, the ...

Oki b2540mfp fuser error. Is there a reset in maintenance mode or do we need a new fuser unit? replace main board...thats what i had to do...

...fuser unit. The fuser is sold as part of the maintenance kit. I've found two part numbers: one for a printer that uses 110 V: OKI-50230120, and one for 220V printers: OKI-50230130. The drum holds the ...

...fuser unit that it uses to bond the toner to the paper, it does this with a heater lamp heating a set of rollers that the paper passes threw after it has printed. Your machine monitors this unit to ...

For your information i'm using the oki B4600 printer Sounds like a worned out fuser drive gear, you need to replace it or check for debrie in the fuser unit preventing it from turning free. Good luck

...fuser unit in your printer. The fuser is what heats the paper to "melt" the toner onto the page. If you haven't been using Okidata cartridges, the one you purchased could either be laying down too ...

010-349, can you help me, please.¿ ERROR 010-349, can you help me, please.¿ Change the Fuser Unit.

fuser unit I got this message ,I checked the printer well **** I haven't get the reason of message , Please advise There is a sensor on the front left side usualy that detects the cover open or closed

...fuser area will be hot. This area is clearly marked. Do not touch it. CAUTION! Never expose the image drum unit to light for more than 5 minutes. Never expose the image drum unit to direct sunlight. ...

...fuser unit is separated from the rear unit (rails). Do it both ends of the rear unit. 3. Check or replace the fuser unit and refit all the removed parts. Place the fuser unit on the rear unit ...