V, Inc. VIZIO RP56 Rear Projection Television "sound bar power problems" Questions

...sound from the TV's speakers or from external speakers like a surround setup? If the OSD is not showing up, then a video sustain boards appears to be corrupt and the TV would require service. You ...

...sound was coming from the right side. The power button was blinking red and the lamp light came on. I unplugged the tv and removed the lamp. It looked fine so I reseated it and turned the tv back on. ...

...sound. Although you can play around with the menu, channels and volume bar comes on the screen. My guess is this is an input board problem but can you help me to pin point to a kick repair more info ...

...Bar Scroll for a few minutes at the end of each day should go a long way toward countering the effects of side bars, network logos, and whatever other less-than-optimal things you put on your screen. ...

...sound bars, vertical lines can be caused by interference, poor contacts, defective vertical sweep section, and the blackout things is caused by a faulty power supply, check any shorted regulator or ...

...problems. Initially, the picture was OK but had vertical bars that appeared to move down the screen (not too distracting, but noticeable). Also, it sometimes powers up without picture. I can hear ...

...problem worse. Is it fixable?? or worth it?? i hope so i love the tv! My first guess is it kind of sounds like a convergence board problem i know they had some service bulletins on them. hope that ...

...left off, the longer it takes to get it to come on again. I have an electronics background and it sounds like a power supply noise problem, perhaps caused by a weak capacitor. If you know what the ...

constant electronic sound from my syncmaster 225MW I just bought a Samsung snymaster 225MW, I have a constant problem with the sound. I first noticed it when I connected my camcorder, and speakers. It

...power-bar if one is in use. 2. Press and hold in the products power button for 1 minute to release the retained electricity from the capacitors and circuit board. 3. Plug the product back into the ...