OKI C5100n Laser Printer "reset network card" Questions

...reset network card but this proves difficult as i cannot find the network menu. When i print the menu map i have every menu on there apart from the network menu. Do you have any ideas? duck, no need ...

...reset of the 8100e interface does not work and the printer is in the factory settings mode! can any one help? u need to put the right IP again, do u know how to do it??? if don´t ask again. The duck, ...

...Network Menu Is not Acessable and the reset on the card does not print out the MAC address? Before you proceed you need to know the static IP, Subnet Mask and Gateway address for this printer. Once ...

...network settings. To cold reset, turn printer off and unplug the network cable. Hold the "checkmark" key and power on the printer. Keep holding the key until all three leds turn on solid. Release the ...

...Reset the network settings only if one of the following conditions applies to your situation: The printer is being moved to a new network, or new network segment, that uses new network settings and ...

...reset the network card back to zero's. You attach it to the network and your server should issue an IP address via DHCP. You should be able to see it on the network then.If not, the jetdirect network ...

...If the password is lost, perform a cold reset by holding down GO button while turning on the HP LaserJet series printer. Printer Network Configurations may need to be restored after a cold

...reset the network settings to factory defults. You can unlock the menu on the 6312 by pressing the MENU and ENTER buttons and keep them held down for 5 to 6 seconds you can then access the menu. The ...

...reset the network card in my lexmark e323 and it is driving me mad. i have held all types of button combination as still nothing. i just cant seem to see the wood for the tree at the moment please ...

...Network reset A network reset changes all network system parameters in NVRAM to the factory defaults. During the network-reset process, all button presses are ignored. Use the following procedure to ...