...drive shaft this is the bar the tractor slide on, it will slide right out. To remove the tractor itself slide it to the larger gap on the left hand side. Note when installing the new tractor you must ...
...tractor unit. d. The fuser drive clutch is slipping; replace it. e. Replace the Engine Controller Board. f. Replace the encoder cable. �� Tractor Encoder. The Tractor Encoder ...
...gears on the left side of the printer that drive the tractor assembly, they may be worn or loose and not messhing as they should to drive form feed. Remove left side cover to check gears. ...
...tractor drive. This will unlock it so you can slide it sideways on its rail. Set it approximately where it should be, load the paper, then adjust it so you have a slight amount of tension across the ...
Question about OKI MICROLINE Office Equipment & Supplies
dfx-9000 drives font tractors down wards. you have to clean the 2 sensors (optical) on the cr unit because they detects always paper
...gear or on the function select gear itself (the gear assembly directly driving the paper feed tractor). if you power off and on again it may work again, but the problem will come back again if ...
...tractor assy for missing teeth on the drive gears but if you don't see anything then it might be a logic bd driver problem. Also check your connections on the main bd as well maybe something came ...
...gear or on the function select gear itself (the gear assembly directly driving the paper feed tractor). if you power off and on again it may work again, but the problem will come back again if ...
Question about OKI MICROLINE Office Equipment & Supplies
...tractor-feed Z-fold? If so, you may have a damaged sprocket drive. If not, you need to remove the platen and check for paper scraps in the paper path and if you ever use the printer with labels, you ...
Question about OKI MICROLINE Office Equipment & Supplies
Tractor sounding noise when I turn printer on I purchase my Sharp in May of 2006. I've always had problems with it and while it was under warranty, I was able to switch out to a different printer. My ...
374 questions posted
Usually answered in minutes!
49 Questions
51 Questions
17 Questions
20 Questions
17 Questions