...SENSOR ERROR Cause: This generally can be caused by two things. 1. The toner cartridge lock lever is not in the correct position. 2. The Transfer Belt lock levers are not in the correct position. ...
...sensor lock switch" "scanner sensor locked" - whats wrong? where is the sensor lock switch??? When you open the top (like putting a document in for scanning) there is a slider (button) on the left ...
...out the magenta cartridge. and make sure the edges are clean. There are little metal pieces on the sides where the sensor reads the cartridge. Also, make sure the "lock" on the cartridge is
...were placed into the machine together and the blue handle is locked. the sensor error happen to me because i replaced the belt and i didn't lock the buttons correctly that solved my sensor
Question about OKI C Office Equipment & Supplies
...lock lever is improper, drum missing, or toner sensor error. OFFLINE." I first thought it was the off-brand cartridge but have now spent more money and bought an original OKI toner cartridge. I have ...
...sensor error turn off eq - open and remove the drum with the color cartridge in locked position still in place - on the drum on the cartridge lock side you will find a small (1/4 ") rectangular ...
Question about OKI C Office Equipment & Supplies
...sensor" or "toner empty" message may result. Note: (Picture at bottom shows incorrect position of locked toner cartridge that may result in either of these messages). Installation Procedure of Image ...
...lock lever back and they are as far back as they can go. Any suggestions. Change the toner with a new oki one, if that fails change the drum too Sensor error should inicate colour too ie K sensor ...
...Sensor Error I have change the black drum and toner cartridge to no avail. What can I do now? Check toner lock lever is in position - Seek attention of service person if restarting the printer does ...
...Sensor errors....You would first check the lock levers that hold the toner cartridges in, if everything is fine with them then you could possible have toner dust on the sensors. First take out the ...
131 questions posted
Usually answered in minutes!
172 Questions
152 Questions
147 Questions
126 Questions
81 Questions