...pressure (remove the foil cover to expose the screw) with the top burners alight adjust the screw 1/4 turn at a time until the flames are bright blue at heart and organge tipped. Increase as much as ...
...cooker knob and hold it the gas comes through,it lights but as soon as I take my finger off the knob it goes out When the oven lighting mechanism lights the gas, the flames heat a temperature sensor ...
...pressure when any othe gas appliance is on. every thing is natural gas. any ideas what it could be thanks danny the best way is to get a gas fitter to check the millibars coming through the pipe. it ...
...pressure to 12 bar I have the same problem in France. Just ordered EURO1000 worth of red diesel and then read on a forum it wont work as the oil thickness is 35 here and Rayburn specifies 28 which is ...
...pressure that the regulator as ng and lp operates at different pressures and the regulator has to be set for what you using like i said im not familiar with your brand or model but i do know the ...
cooker turns its self off all burners do this but some are worse than others is there a part from smeg that controls the flow or ignition ? I know a corgi reg guy but some ideas of this fault would be
...cooker. Be careful not to force it or use excessive pressure, as it may cause damage. 5. If the handle is still not coming off, double-check for any hidden screws or clips that may be holding it in ...
247 questions posted
Usually answered in minutes!
47 Questions
40 Questions
