Question about Kenmore Kitchen Ranges
...oven is probably reaching it's set temperature in about 10 minutes. You really need an electronic thermometer or at least one of those liquid thermometers which you can sometimes find at Ace Hardware ...
...temperature inside the oven and sending a signal to the control board to adjust the gas flow and heat as needed. If the sensor is not functioning properly, it can cause the oven to continue heating ...
...Oven Temperature Issue Oven does not reach set point. For example, when set to 475F, display shows increse in oven temperature to about 430F. We have had several recent incidents where is was clear ...
Question about Rangemaster Kitchen Ranges
...reaching high temperature? Your left hand oven is a conventional oven it has two heating elements one at the top and one at the bottom, if one of these is not working then the high temperature cannot ...
Oven is not reaching proper temperatures We have a Magic Chef Glass Top Oven - Model number is "38HNGTVWSC" - the oven is not reaching the proper temperatures - if we set the oven for 350 - it might ...
Question about Hotpoint Kitchen Ranges
...by fan appears to be working as very hot to touch (in fact too hot to touch) Not sure if there are other elements to check Thanks Lower oven has new element but still not reaching correct
...has been replaced once but it didn't fix the problem. Check the shield in front ok the fan. It may have become distorted with heat and is now touching on the fan when the oven reaches
...temperature the oven light turns off but the oven heating element does not (I do not hear the relay). The temperature probe at room temperature shows ~ 1030 ohms (oven unplugged). If I back probe the ...
oven taking a long time to reached desired recently the oven is taking a long time to reached desired temperature. All breakers working. Need to replace the temperature control..
...oven not reaching temperature oven ignites but gas is not flaring up to reach temperature Hay Irene , you going to have to replace the igniter ( even though its coming on its not pulling enough amps ...
247 questions posted
Usually answered in minutes!
47 Questions
40 Questions
