Pioneer DEH-1600 CD Player "12 wiring" Questions

Wiring, as it sounds like your Constant +12 volt wire is connected to the Switched +12 volt wire. This would cause all settings to return to factory, just like when you lose power due to a bad battery

...what wires are hot and which ones are not it tells you on the cd player,the red wire goes to the +12 volt switched,and the yellow one to the +12 volt constant wire,the black wire to ground

where does the wire ACC RED GO TO please The red wire on the stereo should go to a wire that has a +12 volts when the ignition is turned on. this wire goes to a switched 12 volt source

tell me what I need to do to fix? you also need to check for power at the yellow wire it should be +12 v unswitched which means power all the time wether key is on or off the red is +12 v switched and

...12 volt + source. I hope this helps. Please rate my reply with "4 thumbs up" if it did. Thanks! Usually, purchase of a wiring harness designed specifically for your vehicle model and stereo solves ...

...wiring diagram for a KE 1033 is exactly the same as the KE 1900, both have only 8 wires coming out of their harness plug. Solution:>Black>Ground>Wire #8>Red>12 Volt ignition wire> ...

...back of the radio. this wire is called the amp turn on wire connecting to this wire will provided 12 volts when the xplod cdx gt520 is turned on but if you press the off button on the radio the 12 ...

...wiring Radio Constant 12V+ Wire: Blue/Yellow Radio Switched 12V+ Wire: Gray Radio Ground Wire: Brown Radio Illumination Wire: Green Radio Dimmer Wire: N/A Radio Power Antenna Trigger Wire: Black/Red ...

...wiring connection. You will need to make sure that the yellow wire is connected to a positive 12 volt source at all times. What is happening is that the wire is connected to a switched 12 volt. ...

the radio will not hold memory If your radio will not hold memory then you are lacking a constant 12 volt power source. Check the yellow and red wires at the radio. The yellow wire should be connected