spark plug wire. I am assuming you held the wire near the engine while trying to start it? If so then you need to either replace the ignition coil or hopefully just the spark plug wire. If the wire is
...can connect a new spark plug to the spark plug wire and ground the spark end to the motor you should see a spark if not ajust coil to 010. from flywheel if no spark after that coil is bad get new ...
...spark plug wire eater weedeater the spark plug wire is broken between the coil and the boot If the wire runs all the way to the inside of the coil pack, then you will have to replace the whole coil ...
spark plug, ground it to the engine, pull rope, whatch plug for spark. if no spark, remove kill switch wire from coil. pull rope agin, if you have spark, kill switch is bad. if stil no spark, you have
how do i replace the spark plug wire. Usually the spark plug wire is molded into the magneto case at the magneto end and you have to replace the whole magneto.
...spark plug , but it still will not fire . When I test for spark with na tester , it shows no spark. It has good compression (60) so I have fuel, compression but no spark. What could I be missing , so ...
...spark plug and fuel. any advise will help .thank you Remove the flywheel cover and pull the ground wire off of the off of the coil... Check for spark... If you now have spark you have a "short to ...
...then plug bad, if plug then the weed ******* has a problem with the spark plug wire or the ignition coil. If you have spark at first test, then the problem with the weed ******* is somewhere
...spark plug. Showed expected color. I gently cleaned it. I connected the spark plug wire and held it against the metal area where I removed it, then pulled the cord and could not see a spark. It was ...
2 questions posted
Usually answered in minutes!
825 Questions
167 Questions
142 Questions
121 Questions