Pioneer PRO-99 TV "elite fuse replacement" Questions

...elite well i dont know what is wrong with but one of the fuse is missing it is 8amp125 volt well i live in colorado and cant find the fuse i tried everywhere and they told me that 8amp 225 volt would ...

...Elite Pro-118 sans remote, and there are no techs within 50 miles of me. Problem: won't turn on: A red led lights for the 'main Power' button, but pushing the 'standby/on' button makes the MP button ...

...Elite Pro-700HD and am also experiencing the same problem with a blown 5A 125V fuse on the Power Supply Assembly. A service tech wanted to just replace the Power supply assembly but I haven't agreed ...

...Elite Pro-99 Power Problem My Pro-99 will not power on. If the unit is off completely, pressing the manual Power On button will cause the unit to momentarily power on, the green light comes on and ...

elite pro-910hd will not turn on both and green light on Both the tv and plasma monitor turn on however there is no picture or audio. On the monitor both the green on and red standby indicator are on.

elite also, very easy fix if your handy. Replace the two STK392-110 convergence chips and check the power supply for a burned out fuse (125v 5A most likely). If your handy soldiering this should be no

When I turn on my Pioneer Pro-Elite 530HD, it stays on for a few seconds, then automatically shuts off, then turns on, then turns off...again and again until I manually shut it off. It's like a ...

Elite PRO-510HD rear-projection TV. It's very slow to "warm up", and when it does it's just a blue-screen with regularly-spaced warped colored lines. Doesn't matter the input, and when I hit "menu" it

...such, I do not recommend getting a new board from Pio for this purpose on the x10 models of Pioneer Elite, like this one, and some of the x20 models, which used the same PS board. I instead recommend ...