Pioneer PureVision PDP-5040HD 50 in. Plasma HDTV "reciever power red light" Questions

reciever doesn't come on then the power supply in that needs to be replaced by a service tech. If you disconnect the 2 cables from the media reciever and the panel and then try to turn on the panel it

...power on to my reciever with the remote, the plasma goes green for a second then switches to standby on the tv and reciever. the rec timer light on the reciever starts to blink and the tv screen is ...

...when you turn the surge protector back on itself make sure it is recieving power, there is usually a red light on the switch while recieving power. Then try again once you know there is power to

...power (red light on front of tv is lit up when plugged in) however power buttons on both remote and tv wont turn tv on The power supply board is defected. You need th change a new one. ...

...red power lights blinks what could be the cause i recieved it as a birthday gift jan. 9th 2010 The power supply board is the cause.The board,where the power a/c cord plug in to it.Replaced the power ...

completly dead reciever when you turn on the tv the red light apears but no picture and sound apear. REPLACE YOUR MAINBOARD AND POWER SUPPLY!

...power button is pressed, on the reciever the green light just continously flashes in lots of 10, the REC Timer light also immediately starts flashing at aprox 1 second intervals for 31 times and then ...

...POWER BUTTON IS PRESSED RED STAND-BY BLINKS TWICE THEN GOES BACK TO SOLID RED. do you have any type of signal going into the tv and is it on the correct input? most tv's will do nothing when powered ...

...black also there is no voice or no sounds tv only shows red light that the tv is getting power Good news - don't worry about this TV anymore and just trash it out the moment you buy a new

...POWER UP. RED LIGHT IS ON. Hello, You have to open the back cover of the television to check for bulged capacitors, if found replace with the same rating of the capacitors, but otherwise. Also note ...