Pioneer PRO-119 60" Rear Projection Television "dvd player repair service" Questions

...dvd the player then you can remove the dvd from inside easily......after that try connecting to power supply & switching on it ... check whether the door is opening or not .... if not opening then ...

...DVD Player /VCR Combo. The door for DVD opens but DVD doesn't run properly. The gear turns, but the strap slips. Maybe the strap should be changed. Where can I find a new Strap? Thanks for your help. ...

...dvd player to the TV, and we watched it one time just fine. Now when we try to watch a DVD we just get an audio sound for about 2 seconds, and then nothing at all. There is no longer any picture. ...

...dvd player but apparently was not. What is the solution? jctypes The most likely cause of a problem such as described is failure of the "Hyper Module"; this is one of the "stand-up" PCB's on the main ...

DVD player, the screen lights up a little but color is mostly blue and there are lines across the screen. The green light is on (not blinking) and there is no red light. The sound works. Any Ideas? It

DVD player. Check also for DC voltage. Measure between the center RCA pin and the outside shield. This should be 0 or DC and will vary slightly from 0 depending upon what is playing on the DVD and how

...dvd player when insert disc it jist say read and will not play have u tried a lens cleaner? Did you try another disc and does it has the same problem? was everything working using this player or its ...

...DVD or VCR players on this TV. We disconnected the players and tried them on another TV and they worked just fine so it has something to do with the TV. Is our TV just worn out or do you think it can ...

...DVD player, and it does the same thing, so it makes me think it is a tv problem instead of a cable problem. Any suggesions of what might be going on? If it is a glow around the edges, it could be one ...

...DVD recorder & Player just purchased can't get it to work. Please help. I've just set up my new recorder and cannot get the illustrated screen (in manual) to appear. Have tried various cable ...