Pioneer SD-P5795W 57" Rear Projection Television "convergence settings" Questions

...convergence settings from the service manual will not store and hold. All settings Green Red and Blue show 0 for settings and will not store factory recommended settings. go to the Mitsubishi service ...

the colors are not lining up IT's called convergence. Go into the menu and look for convergence set-up . Look in your owner's manual. Your owner's manual will tell you how to converge your set. When ...

Convergence settings don't stay set I just had the convergence chips and assorted resistors replaced on the convergence board (to fix no blue convergence). That works now, but I have to manually ...

...settings Convergence settings are internal to the set on a circuit board somewhere. If you do not have a service manual for this set and some rather expensive equipment, it is unlikely you would be ...

...convergence settings, but you're not saving them, you're simply exiting the menu screen. Be sure to save your convergence setting for each of the three colors. It sounds like you're setting RED last, ...

Convergence off on Digital Cable I have a RCA D52W20 52 in. Rear Projection HDTV-Ready Television, and when I use the digital cable, the convergence is off, and it's even worse on HD channels. The ...

...settings then goto the convergence section. Try to adjust the red and then the blue convergence. You should be able to move them up, down, left, and right. If you can't move them in all directions ...

Convergence was bad. Before kit was used no audio or video Had problem with convergence. The audio and video eventually went out. Changed convergence chips. Didn't change any resistors. Before

...trying to converge the lines on the tv set form. already tried factory reset Reset will not cure a convergence problem. this model (ws-65711) uses a single convergence chip located on the middle ...

Convergence trouble The colors won't line up correctly. Tried auto and manual, but no use. How can I reset to factory setting for the convergence with the remote? You most likley have bad convergence ...