...easy fix. In advance, thank you for your advice. On most of the Panasonic rear projection sets that have a model number that begins with PT- 3 blinks is a error code for a short or something holding ...
Question about Panasonic Televison & Video
easy to fix Your symptom sounds like a damaged convergence IC. While it is not a very hard repair, this repair can be a bit tricky. If you have a 45W soldering iron, solder, solder wick, and heat sink
Question about Pioneer Televison & Video
...easy to replace. Heres a little case study in changing convergance Ic's, First thing is they are the hardest working Ic's in this set, this is why they are mounted to a huge heat sink to disapate the ...
Question about Panasonic Televison & Video
...sink. They will have a part number stamped on them that will start with an STKXXX-XXX, like STK392-110. Along with the convergence IC?s there will also be some associated components that will need to ...
...easy DIY job if you know what you are doing. If you have never done this before we would advise calling a shop or if you want to do it yourself get a complete kit with instructions and support from ...
Question about Panasonic Televison & Video
...sink. They will have a part number stamped on them that will start with an STKXXX-XXX, like STK392-110, and they are located on the signal board (on the left as you look into the back of the set). ...
38 questions posted
Usually answered in minutes!
154 Questions
129 Questions
91 Questions
84 Questions
61 Questions