Pioneer PRO-510HD 53" Rear Projection Television "turn down power 510" Questions

...down and the green lite remain on but there isn't any picture or sound. If I unplug the set and wait a while and plug the set in and turn it on it will operate great for a few hours or less mostly ...

...power supply board resoldered as I had the same problem. The guy listed below can do it for you as I shipped mine from Illinois to him in California... Piece of cake getting the board out of the back ...

...turn it back on it turned on normaly, but then quickly shut back down to Standby mode. I tried turning it back on using the remote, but the button was not doing anything. I tried pressing the Standby ...

...turn on again, and built-in indicators on the circuitry showed 3 boards now needed attention. With 3 boards to now have to deal with, he decided not to get his set repaired at all, due to the now ...

turn on at all... Means your bulb is going out or is already out... My PRO-710HD also has this problem. The screen will flash with a loud "pop" and it will shut down. I have corrected this temporarily

...turn on again, and built-in indicators on the circuitry showed 3 boards now needed attention. With 3 boards to now have to deal with, he decided not to get his set repaired at all, due to the now ...

...turn it back on. This has been working until now. Nothing. I have traced it down to the board that has the cable inputs going into it. with the wire that goes into the T4 input disconnected the power ...

turn back on after being off for awhile. How do I send the power supply to you for soldering repair? Any special instructions for removing the power supply? Thank you SHUT YOUR UNIT DOWN NOW. We don't

...down and then comes back on with a lod popping sound. The interval is becoming longer. The latest was overnight. I then turned it off for an hour and it came back on. Let me know if you can help. ...

...turn on again. With 3 boards to now have to deal with, he decided not to get his set repaired at all, due to the now tripled expense. It tears my heart out when one of these fine machines goes down ...