...remove the wires from the flyback.. the ones that sit on the flyback itself.. or do they even come off.. i am replacing my whole deflection board but my wires look brand new.. and want to just keep ...
...remove the HV wires from my flyback on my RCA D52W19 TV, there is a tiny plastic piece at the top of the flyback that appears to have been holding the hv wires in place. Tugged a little to hard on it ...
Question about RCA Televison & Video
...(red and black). How do you remove the wires so they can be used again? Repacement flyback part no 259296. Press Down On The Anode & Screen Grid Wires & Turn Counter Clockwise Then Pull ...
...remove the wires from the flyback. This is accomplished by twisting the wire 90 degrees while exerting upward pressure. Instalation is the reverse of removal. Let me know if you need additional ...
...wires already. Not sure how to get the black wire off the flyback. IT twisted off turn clock wise and wirer should come out red is easyer to remove,1 goes to high voltage tripper red black goes to ...
...remove, then I can give you an idea what to do as flyback transformer is not in front of me. The wires don't come off the flyback. You have to take the front cover off where the speakers are. Trace ...
How to remove wires from flyback 259296 How are the two wires removed from the flyback? Any assistance would be helpful. they are suppose to twist out.
...remove all solder from the pins..then gently pry the clips that hold it on the board... this is where you can mess up unless the pins have be completly solder free you can crack the board... NOW the ...
...wire carry several thosand volts. depending on the type of flybacks the wires can be removed at the other end of the wire. i tell you what i do at the shop very carefully remove unsolder the
55 questions posted
Usually answered in minutes!
154 Questions
129 Questions
91 Questions
84 Questions
61 Questions
