Pioneer PRO-520HD 53" Rear Projection Television "remove lens" Questions

Lens Removal 1) Remove the top, bottom and side HOLDER-SCREEN rails and their cushions from the Screen Frame. 2) Lift the screens as a single unit from the frame. 2. Separate the Lenticular Screen and

...remove rear cover and look at the lens--clean with a lens cloth etc----peek up inside and look at the mirror--if not dirty or smudged just clean the lens.removing the screen with its frame can be ...

lens with soft cloth2)Remove front speaker grill cover and access panel Locate screen / focus block = adjust RGB focus controls3)Last,if needed, unlock each focus lens cap = adjust then lock..........

...remove lens assembly by removing the four torx screws. Keep Crt assembly vertical so you won't leak the fluid... Remove the inner lens by carefully prying up on the edge of it.Dump out the fluid in ...

...remove the bottom lens and found out that there is oil uner it. WHAT KIND OF OIL IS IT? Where do I get it from? also I turned the tv on and it had picture for a moment then quit. Is that because it ...

remove the lower cover and check if you have access to Lens and Mirror. Avoid excessive pressure in lens and specially with the mirror while cleaning is made. This process can make the picture clearer

...remove top cover to clean the lens directly. Be careful because if you put too much strength and displace the lens pickup you may make things worse. If all that does not work, the lens pickup must be ...

lens and mirror pioneer 530 you have to remove the rear cover then you can access the lens and mirror, used fiber cloth to clean the lens and mirror.be careful not to use too much force when cleaning

...remove the screws on the back bottom portion of any rear-projector television. when the bottom part is removed, you will see both the mirror and the 3 lens. isopropyl alcohol or windex should do an ...

Where is the focus wheel? The focus for this is with the lens,BUT, before you begin to make any adjustments, CLEAN your lens & mirror. You can reach both by removing the porthole covers on either side