Pioneer PRO-520HD 53" Rear Projection Television "led tv wont stay powered" Questions

...then red led blinks on the board next to red led says Protect LED,,,SO i am assuming tv is in protect mode... If it is a Fuse how do i identify it and where is it located?... read ...

...led on front of the TV, and tv turning off by itself after a while, that indicates a fault condition. The flashing light indicates a diagnostic state called protection. When the TV goes on protection ...

...the front of the tv and or media box. 3) what are the led's on the front of the tv and or media box doing while the tv is displaying "starting up". Let me know and I will be able to better assist

...tv model 53sbx01ba cuts on then immediatly shut off ....several led lights light upon initial turn on....5-6 maybe....then go to only 1 steady led ....all are green.....but no illumination to ...

...tv that won't turn on. the red standby light is lit and when i push the power i hear two clicks and the green timer light flashes quickly then the green led stays lit for a couple of seconds then the ...

...tv flash like it wants to come on but then go back red, you do not get any error indicators, it simply wont come on. Again, wait a day and it will come on and stay on until you turn it off. But when ...

...TV would make a normal buzzing sound , then the power LED would blink a few times, then video/audio would appear. Now,after the buzzing sound the LED will blink and sometimes fail to deliver ...

TV comes out of standby, powers up and then shuts down again - back into standby. Some investigating (and purchase of the service manual) revealed that the internal protection circuits have kicked in

...TV IS NOT BLINKING ANYMORE ONCE I TURN THE SET ON IT WONT STAY ON IT TURNS ITSELF OFF IN SECONDS. CAN YOU HELP??/ Did the set work after the tech replaced the caps? Is the work under warranty? Bad ...

tv wont turn on. i have a Toshiba 57h81, the problem is as fallows. when i plug it in and hit the power button, it wont turn on and led stays blinking, i know a little something about electronics,but ...