Pioneer DJM-600 Silver Professional DJ Mixer with Auto Beat Cou Home Equalizer "lowes crossover channel" Questions

Djm 500. static on my lows and the bass skips. only channel 1 and 2. is there any way to tighten the knobs? hey mate i currently have the same problem did you fix yours if so how did you do it? hi ...

Delay on low frequency EQ Hey I'm wondering if there's a way to fix the delay on the low frequencies on the EQ. Basically I don't have control over cleanly switching out the low frequencies because it

I have a dj mixer ( DJM 300 ) the volume on the 2nd channel goes down very loosely and when it gets up to number 2 or in other words very low it suddenly increases sound and then once again continues ...

Mackee PPM808M 1200 How to set the equalizer How to set equalizer for a Mackee PPM808M 1200 Each channel strip has its own 3 band EQ with knobs that effect the hi, mid, and low. The mid is centered at

Distortion & low signal I have purchased a second-hand Fostex FD-4, set it up (normal mode) as per manual instructions. On attempting to record/monitor a guitar track the gutar signal is coming ...

Technics SH GE70 : 1 bar doesn't do much 1 line (bar) of the right channel 6.3Khz doesn't light up enough.... Tried several settings and cd's, doesn't effect the sound though. Only visual, it lights ...

I'm a guitar player, never had to mess with the PA system. I needed to come up with a monitor system to work with a non powered mixer used for powered mains. I can't afford good powered speakers, so I

djm 600 got a djm 600 mixer, it works fine but the channel one, very low sound, do i have to replace the fader or the connections start with connections and try to clean fader with lubricant contact ...