Visioneer 4800 Flatbed Scanner "remove glass" Questions

...remove the glass, but you shouldn't need to even if you can see the odd bit of dust. However, if you do want to (voiding warranty etc.) here's how: unplug and remove lid use philips screwdriver, ...

...glass. 5. Remove 4 black screws from the bottom of the scanner (two toward the front end, two toward the rear). DO NOT remove the two screws holding the removable panel towards the rear end of the ...

...glass. First you need to remove the scan module by removing two screws on each side, then remove the cable. Carefully take out the module. You will notice 4 small screws in the side, after removing ...

...remove or access glass for cleaning (particles underneath top hood glass). I don't have a user manual, since I was given this unit as is. you cannot.... mmmmmwhhhhhaaaahahahahahahhahahaha You can pop ...

filmy appearance and spots under glass on Epsom V200 Operating heat vaporizes some lubrication grease that condenses on the glass. The glass is removable and can be cleaned like ordinary glass.

...remove the glass, but you shouldn't need to even if you can see the odd bit of dust. However, if you do want to (voiding warranty etc.) here's how: unplug and remove lid use philips screwdriver, ...

...remove ONLY the ones needed holding the glass in place. Once you have the glass removed, use canned air or something to blow out the case. Clean glass and reverse the process. Never EVER spray ...

can then clean the glass. USUALLY you have to flip them upside and remove 4 screws to split the scanner in half, sometime the screws are hidden under rubber feet on the bottom. Some just snap together

...remove cover plate by gently tipping toward top, slide glass with plastic sides up and out, clean with approved cleaner, reverse to reinstall glass (plug in power cord prior to replacing top cover ...