Pioneer VSX-453 Receiver "turntable" Questions

How can I connect an analog turntable to my Pioneer VSX-D710S? Also, do I need a turntable with a built in pre-amp? Pioneer VSX-D710S and turntable? According to the specs there aren't any phono ...

No Sound from Turntable I have a Hitachi HT-45 turntable that I have tried to hook up to my receiver. When I connected the turntable directly, I had to crank the volume on the receiver just to get ...

Turntable won't turn Hi! Without any other information (and assuming you've checked to make sure there is power to the turntable and that it is turned on), the likely culprit is the belt drive of your

Can I connect a turntable to my Sony mhc nx3av system which I got 12/13 years ago and it is great. Will it be accessed via the MD option? And must I get a turntable with a pre-amp? Thanks in advance. ...

Minimal volume for my turntable Greetings, I wanted to plug in my turntable into the auxiliary input of my Denon AVR588, when I did the sound output was minimal. I had to turn the volume to maximum to

The ground for the turntable connection is not working. I've got a bad hum with the ground wire attached to the screw on the receiver and a worse hum when I disconnect it. I had the turntable checked ...

Can you use the AUX input to connect to L and R RCA line out from a turntable ? I want to know how to properly hook a turntable into this unit. it depends on the turntable. If it is an older turntable

Can't seem to get any music from the turntable the only time I get any sound with the turntable is if I turn it up to the top...and then there is considerable static (obviously). I have hooked my ...

...switch i am unable to get sound from my second pair of ''b'' speakers. plus i am unable to get my turntable to produce audio To make sure please switch the working "A" cables and speaker pairs with

Turntable connection Can you connect a analogue turntable to a RX-V361? Yes, you'll need to purchase a PHONO PRE-AMP, and then connect the turntable to the pre-amp, and the pre-amp to the LINE INPUT ...