Pioneer VSX-D812 Receiver "amp clicking" Questions

...clicking or not. It is normal to all Hi-Power amps, there will be a click sound, catching speaker output relay. If the amp works properly, the click sound can neglected. But if amp cuts off after the ...

Help required for dumbo on Amps Denon AVR 2808CI Hi! this is my first purchase of any kind of amp. I purchased Denon AVR 2808Ci in USA and moved into India and conected it will stepdown voltage ...

...hear only ONE click when you first turn the amp on (delay of about 2-5 seconds). If they keep clicking the amp outputs are next. Also, is there any indication on the front panel of what is

Integra receiver clicking Zone 2 on and 5.1 You most likely have a power amp problem, disconnect all speakers and see if still does the clicking, if so you have an output amp problem

Centre speaker stops functioning Sony STR-DE475 5.1 receiver After a short time of switching on the amp, an audible click is heard and the centre speaker ceases to function. Is the audio for the ...

......

clicking' off a few seconds after turned on Does the receiver work OK? These are probably electromechanical switches (called relays) which yamaha uses a lot. They use electricity to connect/disconnect

...Do you hear the relay click when you turn the unit on? If not you have a issue with one or both amps. If you do get a relay click, check your pre-amp out/main amp in connections on the back. You ...

Amp turns on I think its a relay little black box click have power click of it goes can I jump this out Sx315 and black box has 9vdc on it The click you hear is the relays switching on the power amp ...

...a bit then it clicks and the speakers shut off i smack it they come on click click off again these amps have a common problem with bad solder connections. Check the connections on the amp IC's and ...