...the correct diameter of the belt in your unit ...
...unit apart right now and although by now you've likely figured it out, I don't think there is a third longer belt, the carousel is gear driven by one of the short belts and a series of gears. The ...
CD wont eject This is a common problem with units that utilize a belt torque transfer system- the belt gets old and stretches. It can also be a defective eject button as has been seen in Broadcast ...
belt that drives the slider unit via the motor. This small belt causes all sorts of problems. If the belt is broken or slipping, it can cause skipping, dropouts, or simply no start up at all. Also, if
Question about Thomson Audio Players & Recorders
belt that drives the slider unit via the motor. This small belt causes all sorts of problems. If the belt is broken or slipping, it can cause skipping, dropouts, or simply no start up at all. Also, if
Question about Technics Audio Players & Recorders
...can I have the unit repaired. It is stuck in search mode. might be just a broken drive belt - pretty common on these units. Take the cover off and look at the top of the cd mechanism for the
...unit ? so little info. but my best guess is the motor, or belt. best probibility is the drive belt is shared by both decks therefore the tape decks woun't engage or move the tape along the tape path. ...
Question about Technics Audio Players & Recorders
...belt is way too loose, the unit doesn't move at all, if the belt is little too loose, the player-unit will move a bit, but there is not enough torque on the gears to reach the end position (where the ...
belt that drives the slider unit via the motor. This small belt causes all sorts of problems. If the belt is broken or slipping, it can cause skipping, dropouts, or simply no start up at all. Also, if
29 questions posted
Usually answered in minutes!
325 Questions
254 Questions
185 Questions
116 Questions
103 Questions