hooked up through the "phono" connection but in all cases both speakers worked. Be certain you have plugged in the cables completely will see it is apparently not very complicated so if the connections are the problem you can probably even fix it yourself. more...
it is possible that you still have many more bad solder connections. Some bad solder connections may not look bad to somebody with if the speaker appears to be fine. If you have any speakers connected to the unit that area below the rated impeadance for more...
do as the end user. 1. is to disconnect the speakers and see if it turns on without the overload error. If going into protect mode. Another possibility is that the solder connections on the amp board are bad. These Technics receivers are very more...
operate for a minute or so, then shut off. Ive checked connections, reversed channels to eliminate the head unit (JVC digifine) 2) The as above and the problem remains in the right channel. The speakers can handle well above the stated RMS and peak levels. I more...
a DC condition is present, and in doing that, save your speakers form damage. Check for a DC offset condition on the junction legs of the transistors allows for "growth" between legs and internal connections of the transistor. Check for "black death" on the legs of more...
long you've had this unit but over a period of time speakers being run at high output can lose some of their bite. the doctor but before doing so, double check your wiring and connections etc.
Good Luck
BMW more...