Technics SA-DX1040 Receiver "speaker" Questions

Denon AVR-3802 Power cuts out and standby light blinks when connected to speakers. Works fine with headphones. Suggestions? I have repaired many of these Denon receivers over the last few years. Since

...It could be bad solder connections on in the amplifier circuit or power supply, it could be a bad speaker or a bad output channel inside the receiver if this happens only when it gets turned up

Speaker Detect error Left Rear Onkyo TX sr 506 receiver. Automatic speaker set-up. left rear speaker detect error. Speaker works, ran new wires direct to LR speaker. No rear surround. Hey there. I had

When I hook up the rear speakers to my in-wall speakers, I can't get any sound. I have speaker button 1 and 2 selected. Hi: you need to clear that you connect wall speakers for font,center or rear ...

Hi - I have a Sony V444ES receiver that I have four speakers on A (in house) and two on B (outside). I hooked up a third speaker (rock speaker) for outside use however the sound is very low compared ...

rear speakers don't work Surround sound won't work on two rear speakers and center speaker, but it does on the subwoofer and front speakers. but when i go through the menu to do the speaker test, all ...

can you run 200watt 6ohm speakers on the RX-V490 I keep blowing speaker parts, 1 teeter, 2 woofers and an trying to solve the problem, playing cds through the LD section so we can watch dvd music. Hi ...

B speaker setup problem I have a Yamaha RX-V663 receiver. I want to use the "extra speakers" as a B speakers outside on my patio. I have the "extra sp assign" setting set to zone B. The Problem: When ...

subwoofer I am having trouble setting up my speaker settings to have the subwoofer work. I have been through the manual many times. The front mains, rear left and right and center channel work fine. I